 Corner Rounding End Mills |
| |
| Series 15R1V - Corner Radii .031-.125 |
|
D1
Nominal Diameter |
New
Cutter Number |
L1
Extension Length |
L2
Overall Length |
D2
Shank Size/Style |
Number
of Inserts |
Accepts
Insert Radius |
.750 |
15R1V-0702084R01 |
2.0 |
4.25 |
.750 Weldon |
1 |
.031-.125 |
1.000 |
15R1V-1002080R01 |
2.00 |
4.25 |
1.000 Weldon |
2 |
.031-.125 |
|
| Inserts |
|
Insert # |
Corner |
Grade IN2030 |
BEEW120308R-CR |
.031"R |
X |
BEEW120316R-CR |
.062"R |
X |
BEEW120325R-CR |
.094"R |
X |
BEEW120332R-CR |
.125"R |
X |
|
| |
| Series 15R4H - Corner Radii .187-.250 |
|
D1
Nominal Diameter |
New
Cutter Number |
L1
Extension Length |
L2
Overall Length |
D2
Shank Size/Style |
Number
of Inserts |
Accepts
Insert Radius |
1.000 |
15R4H-1002080R01 |
2.00 |
4.25 |
1.000 Weldon |
2 |
.187-.250 |
|
| Inserts |
|
Insert # |
Corner |
Grade IN2040 |
FEEW250348R-CR |
.187"R |
X |
FEEW250364R-CR |
.250"R |
X |
|
| |
| Hardware |
Insert Screw |
Driver |
New Part # |
Torque
(in lbs) |
New Part # |
SE06-028-00 |
25-30 |
DS-T15T (Tx-15) |
|
| |
 |
| Operating Guidelines |
Material |
Brinnel Hardness |
SFM |
Feed per Insert |
Coolant |
Aluminum |
6061-T6, 7075 T-6, 2024 |
- |
1500-3000 |
.004-.006 |
Yes |
Cast Iron |
Gray |
150-250 |
1000-1500 |
.004-.006 |
No |
Nodular |
Steel |
Low Carbon 1018, 8620 |
100-250 |
1000-1500 |
.004-.006 |
No |
High Carbon F-6180, Nitrally 52100 |
250-400 |
Alloyed Steel 4140, 4340, 6150 |
150-300 |
Tool Steel A-6, D-1, D-2, P-20 |
Up to 300 |
Stainless Steel |
300 Series, 304, 316 |
- |
350-1000 |
.004-.006 |
Yes** |
400 Series, 15-5 PH, 17-4 PH |
- |
13-8 PH |
- |
Yes |
Nickel Alloys |
Inconel 600, 706, 718, 903, Hastelloy, Waspalloy |
- |
75-120 |
.004-.006 |
Yes |
Titanium |
6AL-4V |
- |
100-150 |
.004-.006 |
Yes |
| **May not be required at high speeds. |
|
|
|
