| |
 |
|
|
V-Max
Strength, Economy, and Smooth Cutting |
| Features: |
|
| › Superior strength for ferrous metals. |
| › Free-cutting pos/pos geometry. |
| › Eight indexes when used in both right and left-hand cutters. |
| › Coarse, medium, and high-density are stock standards in both right and left-hand rotation. |
| › Optional chamfered inserts reduce breakout. |
| › Machines 90-degree walls at depths of cut less than .250" . |
| › Maximum depths of cut up to .480". |
|
| Inserts and Carbide Grades |
|
| › NNE324-104 insert available in grade IN6515 for dry machining of grey and nodular irons. |
| › NNE324-100 insert available in grade IN2015 for wet machining of grey and nodular irons. |
| › NNE324-100 insert available in grade IN1530 for machining of low carbon and alloyed steels. |
| › NNE324-100 insert available in grade IN2040 for machining of stainless steels. |
|
|
For a 36-page brochure on the  product line, click here. (PDF file - 1.7MB) |
30-degree Heavy-Duty Face Mill
Roughing only, heavy feed, extended reach, reducing breakout, when only RH rotation spindles are available.
Series 6M6V |
|
3-degree Heavy-Duty Face Mill
Roughing, One-Cuts, Finishing, Cutting near 90-degree shoulder where minimal lead angle is acceptable, when only RH rotation spindles are available.
Series 6L6V |
|
0-degree Heavy-Duty Coarse-, Medium-Density Face Mill
Series 6K6V |
|
|
|
|
 |
Insert and Hardware Information and Operating Guidelines
For the 3 Tools Directly Above Are HERE |
|
|
|
|
 |
|
 |
|
